Опис
1. First of all, the performance of the plastic must be stable (the grade and batch of the plastic should be consistent), and the quality of the recycled material must be OK;
2. The particle size of the nozzle material must be uniform (6-8mm), the addition ratio must be consistent (about 5%), the drying quality must be consistent, and the material supply must be timely and stable;
3. Optimize the injection molding process conditions of the helmet and control it (do not adjust the machine frequently), and measure and control the mold temperature (pay attention to whether the mold water channel is blocked or rusty, and the water pressure, water flow and water quality in the water pipe);
4. During the injection molding production process, the cleaning, lubrication, and maintenance of molds, injection molding machines, and peripheral equipment must be done;
5. Increase the control of the injection molding process to ensure stable injection molding (no injection abnormalities, no mold failures, no poor quality, no machine failures, no material breaks, no flash, etc.) to meet the requirements of automated injection molding helmets need;
6. The main flow gate can be cut in the mold, automatically cut with air after the robot is taken out, semi-hot runner, etc. There is no need to use manual processing of the gate.
6. The main flow gate can be cut in the mold, automatically cut with air after the robot is taken out, semi-hot runner, etc. There is no need to use manual processing of the gate.
Популярні Мітки: